RO Membrane

CSM RO Membrane

Product Details:
  • Brand: CSM
  • Size: 40.0 inch (1,016 mm) 8.0inch (201 mm)
  • Material: Thin-Film Composite Polyamide (PA)

We are Supplier of CSM RO Membrane . These Membranes are made from very high quality raw material which ensures high durability at its user end. These Membranes are in high demand in the market. Different sizes and designs are easily available with us . Feel free to contact and to know about the prices.

Specification:

  • Permeate flow rate: Nominal salt rejection: Effective membrane area: Feed spacer thickness:
  • 9,500 GPD (36.0 m3/day) 99.7% 365 ft2 (33.9 m2) 34 mil
  • 1. The stated product performance is based on data taken after 30 minutes of operation at the following test conditions:
  • • 2,000 mg/L NaCI solution at 225 psig (1.5 MPa) applied pressure • 15% recovery • 77 of (25 0C) • pH 6.5-7.0
  • 2. Minimum salt rejection is 99.4%. 3. Permeate flow rate for each element may vary but will be no more than 15%. 4. All elements are vacuum sealed in a polyethylene bag containing 1.0% SBS (sodium bisulfite) solution and individually packaged in a cardboard box.
  • Membrane type: Membrane material: Element configuration:
  • Thin-Film Composite Polyamide (PA) Spiral-Wound, FRP Wrapping
  • Dimensions and Weight Part Number Model Name A B C Weight Inter-Brine Seal connector RE8040-BN 40.0 inch (1,016 mm) 8.0inch (201 mm) 1.12 inch (28 mm) 15 kg 40000308 40000309
  • 1. Each membrane element supplied with one brine seal, one interconnector (coupler) and four o-rings. 2. All RE8040 elements fit nominal 8.0 inch (201 mm) I.D. pressure vessels.
  • The information provided in this document is solely for informative purposes. It is the user's responsibility to ensure the appropriate usage of this product.Toray Chemical Korea Inc. assumes no obligation, liability or damages incurred for the misuse of the product or for the information provided in this document.This document does not express or implies any warranty as to the merchantability or fitness of the product.

Nano Filtration Membrane

Product Details:
  • Brand: CSM

We are engaged in offering our precious clients an optimum quality range of Nano Filtration Membrane. This filtration membrane is used to remove Bacteria, Virus and TSS from the water. Provide hygienic and healthy water, this filtration membrane is manufactured as per the latest technological advancements using premium quality components and advanced technology.

 

Features:

 

  • Superior performance

  • Durable finish standards

  • Accurate dimensions for easy installation

  • Corrosion proof

Ultra Filtration Membranes

Product Details:
  • Brand/make: csm
  • Installation Service: Yes

We are the well-known firm engaged in offering a precisely engineered range of Ultra Filtration Membranes. These membranes are effective water purification technology used for production of high-purity water. Effective in the removal of colloids, proteins, bacteria, pyroxenes, etc., these filter membranes are designed and manufactured by our experts using high quality raw material. We offer these ultra filter membranes in different specification as per the requirements of clients.


Features:

 

  • High efficiency

  • Durability

  • Compact design

  • Easy installation

4040 BN Membrane

Approx Price: Rs 8,000 / Piece 
Minimum Order Quantity: 100 Piece
Our organization has successfully expanded its business in market owing to the offered elevated quality array of 4040 BN Membrane. Our offered range of membrane includes brackish water, sea water, ultra filtration, nano filtration, low fouling and low energy membrane. The offered membrane is manufactured utilizing superior quality raw material and latest technology. Moreover, a team of our quality controllers conducts a series of quality tests on the entire range to seek out any possible defect. In tune with industry standard, we provide the entire range of membrane in various customized options and industrial leading prices.

Features:

  • Compact design
  • Sturdy structure
  • Easy to install

Industrial RO Components

Product Details:
  • Automatic Grade: Automatic

Industrial RO components offered can made available by us in different configuration choices with support of different cartridge filters/cartridge elements present in the housing as per the specific filtration demands.

Specification:

  • RO membranes auto wash and manual wash, which can protect RO membrane easily
  • Good circuit design equipment auto stop and run when high/low level water
  • Auto-check conductance display guarantee watching water quality
  • Multiple medium beforehand filter increases the capacity of water treatment

4040 RO Membrane

Product Details:
  • Diameter: 4 inch
  • Length: 40
  • Brand: CSM

We are reckoned as prominent enterprise offering most leading brands RO Membrane. Our offered range of membrane includes brackish water, sea water, ultra filtration, nano filtration, low fouling and low energy membrane. Available in 8040 and 4040 standard sizes, we are offering these high performing membranes at the best prices.

Brands Offered:
  • Toray / CSM
  • Filmtec
  • Hydranautics

8040 RO Membrane

Product Details:
  • Diameter: 8 inch
  • Length: 40
  • Brand: CSM

We are reckoned as prominent enterprise offering most leading brands 8040RO Membrane. Our offered range of membrane includes brackish water, sea water, ultra filtration, nano filtration, low fouling and low energy membrane. Available in 8040 and 4040 standard sizes, we are offering these high performing membranes at the best prices.

Brands Offered:

    • Toray / CSM
    • Filmtec
    • Hydranautics

    Permeate flow rate: Nominal salt rejection: Effective membrane area: Feed spacer thickness:


    1. The performance of the provided product is rooted from the data that is determined after half an hour of operation on the basis of below listed testing parameters:

    2,000 mg/L NaCI solution at 225 psig (1.5 MPa) applied pressure 15% recovery 77 of (25 0C) pH 6.5-7.0

    2. Minimal rejection of salt is 99.4%.

    3. The Perfused flow rate of each and every element may differ but it will never be more than 15%.

    4. For secure transportation, all the elements are properly packed and vacuum sealed in safe to use polyethylene bag that contains 1.0% SBS (sodium bisulfite) solution. Also, all the elements are separately packed in cardboard boxes.

    Membrane type: Membrane material: Element configuration:
    Thin-Film Composite Polyamide (PA) Spiral-Wound, FRP Wrapping

    Model Name- A B C Weight Inter-Brine Seal connector RE8040-BN

    Dimensions- 40.0 inch (1,016 mm) 8.0inch (201 mm) 1.12 inch (28 mm)
    Weight- 15 kg (40000308, 40000309)

    1. One Brine Seal, Four O-Rings and One Inter Connector (coupler) is supplied with each of the membrane element.
    2. All RE8040 elements properly fits in nominal 8.0 inch (201 mm) I.D. pressure vessels.

    Provided data in this doc is exclusively for explanatory purposes and its only user's duty to make sure that the provided products are properly used. Toray Chemical Korea Inc. expects no obligation, damages or liability is incurred for misusing either products or the information provided in this doc. This doc also does not indicate any warranty of the product

    Membrane Housing 40 x 40 inch

    Product Details:
    • Size/Dimension: 40*40
    • Brand: Adwyn (imported)
    • Color: Silver & Steel Gray(FRP)

    SPECIFICATIONS:

     

    Permeate flow rate:2,000 GPD (7.6m3/day) Nominalsalt rejection:99.7%  Effective membrane area:75ft2 (7.0m2)

    Feed spacer thickness:      34mil

    1.       The stated product performance is based ondata taken after 30 minutes of operation at the following

    2.       test conditions:• 2,000 mg/L NaCl solution at 225psig (1.5MPa) applied pressure 15% recovery 77 oF (25 oC) pH 6.5–7.0

     

    2. Minimumsalt rejection is 99.4%.

    3. Permeate flow rate for each element may vary but will be no more than 15%.

    4. All elements are vacuum sealed in a polyethylene bag containing 1.0% SBS (sodium bisulfite) solution and individually packaged in a cardboard box.

     

    • Membrane type:Thin-Film Composite
    • Membrane material:Polyamide(PA)
    • Element configuration:Spiral-Wound, FRP Wrapping
    Looking for RO Membrane ?
    © Adwyn Chemicals Pvt. Ltd.
     
    Desktop Site Back to top